Pagina 6 di 26
Re: Async USB2 - SDR/Audio-Widget collaborative project
Inviato: 30 nov 2011, 13:35
da PPoli
Sembra quasi un corriere. Ma non c'è su Internet.
Mi iteressava più che altro sapere che non fosse qualcosa tipo il monitorino a 4 linee.
Comunque....stassera ne ordino un paio, se ci sono. Se qualcuno vuole unirsi....
Re: Async USB2 - SDR/Audio-Widget collaborative project
Inviato: 30 nov 2011, 13:54
da gluca
quello che faro' con il pc nuovo quando arriva ...
Re: Async USB2 - SDR/Audio-Widget collaborative project
Inviato: 30 nov 2011, 14:21
da UnixMan
gluca ha scritto:
quello che faro' con il pc nuovo quando arriva ...
continuo a non capire perché non vuoi provare con quello che hai già. Tra l'altro, con windoze dicono di utilizzare "
Cygwin", che altro non è che una sorta di layer di compatibilità Unix su windoze: a quel punto, non vedo perché non utilizzare invece un Linux nativo (che è meglio...).
Re: Async USB2 - SDR/Audio-Widget collaborative project
Inviato: 30 nov 2011, 14:26
da UnixMan
PPoli ha scritto:Mi iteressava più che altro sapere che non fosse qualcosa tipo il monitorino a 4 linee.
manda un mail a Børge e chiedigli se anche la AB1.1 supporta il display e nel caso se ha anche le schedine adatte...
(poi facceelo sapere, che interessa anche a me... quando ho ordinato la mia, mi sono dimenticato di chiederglielo).
Re: Async USB2 - SDR/Audio-Widget collaborative project
Inviato: 30 nov 2011, 14:27
da gluca
perchè il PC che ho è un rottame che neanche si avvia ed ha problemi hardware e quello che cito come nuovo è il notebook aziendale su cui non posso neanche pensare di fare pasticci linux
Re: Async USB2 - SDR/Audio-Widget collaborative project
Inviato: 30 nov 2011, 14:33
da PPoli
Allora aspetti che arrivi a me e se poi funziona vengo a trovarti a Torino con una bottiglia di Brunello.
Re: Async USB2 - SDR/Audio-Widget collaborative project
Inviato: 30 nov 2011, 15:25
da UnixMan
gluca ha scritto:perchè il PC che ho è un rottame che neanche si avvia ed ha problemi hardware
tentar non nuoce... se si accende ma non parte, facile che sia banalmente l'HDD danneggiato (o addirittura solo un problema software, con windoze a lungo andare è quasi la norma!).
gluca ha scritto:e quello che cito come nuovo è il notebook aziendale su cui non posso neanche pensare di fare pasticci linux
ma quali pasticci!? ci infili un CD "live" e fai il boot da quello. L'HDD non lo tocchi neanche. Quando spegni non resta traccia!
Re: Async USB2 - SDR/Audio-Widget collaborative project
Inviato: 30 nov 2011, 16:18
da gluca
al più ci provo se dici così ... ma non va a salvare sul HDD? dove scarico il cd live?
Re: Async USB2 - SDR/Audio-Widget collaborative project
Inviato: 30 nov 2011, 17:05
da UnixMan
gluca ha scritto:al più ci provo se dici così ... ma non va a salvare sul HDD?
a meno che tu non gli dica espressamente di farlo, no.
gluca ha scritto: dove scarico il cd live?
ce n'è una marea. Come ti dicevo, anche il
CD di installazione di Ubuntu può essere utilizzato come "live" (senza installare nulla). Se poi scarichi la
versione su DVD, è ancora più completa. Oppure puoi usare il buon vecchio
Knoppix, ecc. L'importante è che abbia un kernel >= 2.6.38.
Re: Async USB2 - SDR/Audio-Widget collaborative project
Inviato: 01 dic 2011, 09:35
da Giaime
PPoli ha scritto:Sembra quasi un corriere. Ma non c'è su Internet.
Mi iteressava più che altro sapere che non fosse qualcosa tipo il monitorino a 4 linee.
Si, gli ho chiesto, sono le tasse norvegesi.
Per l'LCD, la scheda supporta un 1x16, basta (ma non ho provato, sto guardando lo schema) collegare il display agli appositi piedini che, a occhio e croce, dovrebbero essere quella serie di pin tra il modulo USB e la parete più vicina del contenitore.
Re: Async USB2 - SDR/Audio-Widget collaborative project
Inviato: 01 dic 2011, 12:53
da PPoli
Si, gli ho chiesto, sono le tasse norvegesi.
Si, gli ho scritto anche io e mi ha dato la risposta.
Oggi vado con l'ordine.
Re: Async USB2 - SDR/Audio-Widget collaborative project
Inviato: 01 dic 2011, 22:49
da gluca
io mi sono rotto 3/4 di cocomero co 'sto widget ... non funzia manco sul portatile winzoz dell'ufficio e siccome e' blindato e non mi lascia installare un bel niente senza la password di amministratore non posso neanche far girare l'eseguibile per controllare il firmware. mo' lo prendo e lo butto dalla finestra (computer, widget e gia' che ci sono pure l'altro pc vecchio). fanculo, ridatemi il mio mac.
Re: Async USB2 - SDR/Audio-Widget collaborative project
Inviato: 01 dic 2011, 23:44
da UnixMan
gluca ha scritto:non funzia manco sul portatile winzoz dell'ufficio
neanche se lo metti in modalità UAC1? (il widget, con i tastini) su windows in quel modo
deve funzionare al primo colpo! Se non va' potrebbe esserti arrivato un esemplare difettoso...
gluca ha scritto: e' blindato e non mi lascia installare un bel niente senza la password di amministratore
ma riesci a fargli fare il boot da un CD o hanno blindato anche il BIOS?
gluca ha scritto:e gia' che ci sono pure l'altro pc vecchio
li hai provato a far partire una live?
Re: Async USB2 - SDR/Audio-Widget collaborative project
Inviato: 02 dic 2011, 08:18
da gluca
muto in entrambe le modalità. il pc dell'ufficio lo lascio stare, provo a recuperare il vecchio PC e metterlo a posto eventualmente con linux
Re: Async USB2 - SDR/Audio-Widget collaborative project
Inviato: 02 dic 2011, 11:33
da UnixMan
gluca ha scritto:muto in entrambe le modalità.
a questo punto, se in modalità UAC1 windows lo ha riconosciuto e configurato correttamente ma l'uscita è rimasta muta, temo proprio che ti sia capitato un esemplare difettoso (o che si è danneggiato durante il trasporto, ad es. qualche saldatura saltata).
gluca ha scritto:provo a recuperare il vecchio PC e metterlo a posto eventualmente con linux
ottima idea...

dato che sei abituato al Mac, con l'interfaccia "Unity" dovresti sentirti a casa.

Re: Async USB2 - SDR/Audio-Widget collaborative project
Inviato: 02 dic 2011, 11:45
da gluca
devo aprirlo e vedere che c'è dentro ... cheduepalle ...
Re: Async USB2 - SDR/Audio-Widget collaborative project
Inviato: 03 dic 2011, 20:14
da UnixMan
Arrivato!
Ha funzionato al primo colpo senza fare nulla, sia in modalità UAC1 (LED verde) che UAC2 (LED rosso), utilizzando banalmente i tastini per passare dall'una all'altra. Non ho ancora neanche provato ad installare il software di controllo.
Ci sto' ascoltando or-ora i demo HD di 2L. Ancora non ho fatto confronti diretti con il mio NorthStar ed è presto per trarre qualsiasi conclusione definitiva, ma direi che suona più che bene!

Re: Async USB2 - SDR/Audio-Widget collaborative project
Inviato: 03 dic 2011, 23:53
da PPoli
Ordinati anche il mio e uno per Campedelli.
Borge me li spefisce lunedì.
Re: Async USB2 - SDR/Audio-Widget collaborative project
Inviato: 04 dic 2011, 02:51
da UnixMan
benvenuti nel "club"!
Dimenticavo:
Codice: Seleziona tutto
spmc:~# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 1241:f728 Belkin
Bus 005 Device 002: ID 0471:060d Philips (or NXP) Consumer Infrared Transceiver (SRM5100)
Bus 001 Device 006: ID 16c0:03e8 VOTI free for internal lab use 1000
è l'ultimo...
Codice: Seleziona tutto
spmc:~# lsusb -v -d 16c0:03e8
Bus 001 Device 006: ID 16c0:03e8 VOTI free for internal lab use 1000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2 ?
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor 0x16c0 VOTI
idProduct 0x03e8 free for internal lab use 1000
bcdDevice 10.00
iManufacturer 1 www.obdev.at
iProduct 2 DG8SAQ-I2C
iSerial 3 1.0.0.0.0.0.A
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 161
bNumInterfaces 3
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 0 (Defined at Interface level)
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 1
bInterfaceCount 2
bFunctionClass 1 Audio
bFunctionSubClass 0
bFunctionProtocol 32
iFunction 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 1 Audio
bInterfaceSubClass 1 Control Device
bInterfaceProtocol 32
iInterface 7 SDR-Widget
AudioControl Interface Descriptor:
bLength 9
bDescriptorType 36
bDescriptorSubtype 1 (HEADER)
bcdADC 2.00
bCategory 4
wTotalLength 64
bmControl 0x00
AudioControl Interface Descriptor:
bLength 8
bDescriptorType 36
bDescriptorSubtype 10 (CLOCK_SOURCE)
bClockID 5
bmAttributes 0x01 Internal fixed Clock
bmControls 0x07
Clock Frequency Control (read/write)
Clock Validity Control (read-only)
bAssocTerminal 3
iClockSource 5 Clock 2
AudioControl Interface Descriptor:
bLength 17
bDescriptorType 36
bDescriptorSubtype 2 (INPUT_TERMINAL)
bTerminalID 17
wTerminalType 0x0101 USB Streaming
bAssocTerminal 0
bCSourceID 5
bNrChannels 2
bmChannelConfig 0x00000003
Front Left (FL)
Front Right (FR)
bmControls 0x0000
iChannelNames 0
iTerminal 8 Audio-widget
AudioControl Interface Descriptor:
bLength 18
bDescriptorType 36
bDescriptorSubtype 6 (FEATURE_UNIT)
bUnitID 18
bSourceID 17
bmaControls( 0) 0x00000003
Mute Control (read/write)
bmaControls( 1) 0x00000003
Mute Control (read/write)
bmaControls( 2) 0x00000003
Mute Control (read/write)
iFeature 0
AudioControl Interface Descriptor:
bLength 12
bDescriptorType 36
bDescriptorSubtype 3 (OUTPUT_TERMINAL)
bTerminalID 19
wTerminalType 0x0302 Headphones
bAssocTerminal 0
bSourceID 18
bCSourceID 5
bmControls 0x0000
iTerminal 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 1 Audio
bInterfaceSubClass 2 Streaming
bInterfaceProtocol 32
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 1
bNumEndpoints 2
bInterfaceClass 1 Audio
bInterfaceSubClass 2 Streaming
bInterfaceProtocol 32
iInterface 0
AudioStreaming Interface Descriptor:
bLength 16
bDescriptorType 36
bDescriptorSubtype 1 (AS_GENERAL)
bTerminalLink 17
bmControls 0x07
Active Alternate Setting Control (read/write)
Valid Alternate Setting Control (read-only)
bFormatType 1
bmFormats 1
PCM
bNrChannels 2
bmChannelConfig 0x00000003
Front Left (FL)
Front Right (FR)
iChannelNames 0
AudioStreaming Interface Descriptor:
bLength 6
bDescriptorType 36
bDescriptorSubtype 2 (FORMAT_TYPE)
bFormatType 1 (FORMAT_TYPE_I)
bSubslotSize 4
bBitResolution 24
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x0188 1x 392 bytes
bInterval 2
AudioControl Endpoint Descriptor:
bLength 8
bDescriptorType 37
bDescriptorSubtype 1 (EP_GENERAL)
bmAttributes 0x00
bmControls 0x00
bLockDelayUnits 0 Undefined
wLockDelay 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 17
Transfer Type Isochronous
Synch Type None
Usage Type Feedback
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 4
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2 ?
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0001
Self Powered
...certo dovrebbero curare un po' "l'estetica" degli ID USB.

Re: Async USB2 - SDR/Audio-Widget collaborative project
Inviato: 05 dic 2011, 12:52
da AeFFe
Siamo in odore di prenderne uno anche noi. Siamo in tre ma preferiamo valutare la cosa prima di fare una scelta definitiva. Per ora abbiamo sul banco la soluzione M2Tech. Appena arriva l'altra faremo dei confronti.
A.